RAM DDR4 16GB 3200MHz KINGSTON Model : KVR32S22S8/16 (For Laptop)

Memory Module Specifications

DESCRIPTION

This document describes Value RAM's KVR32S22S8/16 as a 1G x 64-bit (16GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 1G x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

€ Power Supply: VDD = 1.2V Typical € VDDQ = 1.2V Typical € VPP = 2.5V Typical € VDDSPD = 2.2V to 3.6V € Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals € Low-power auto self refresh (LPASR) € Data bus inversion (DBI) for data bus € On-die VREFDQ generation and calibration € Single-rank € On-board I2 serial presence-detect (SPD) EEPROM € 8 internal banks; 2 groups of 4 banks each € Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) € Selectable BC4 or BL8 on-the-fly (OTF) € Fly-by topology € Terminated control command and address bus € PCB: Height 1.18€ (30.00mm) € RoHS Compliant and Halogen-Free